Alcorn Mcbride ShowTouch Guía de usuario descargar pdf (Pagina 41)

Specifications Page 39

Specifications

Power

ShowTouch7 12VDC at 5 Amps

ShowTouch10 12 VDC at 5 Amps

ShowTouch17 12 VDC at 7 Amps

An external power supply is included with ShowTouch and will provide the required input

power. The power supply rating is 100 to 240 VAC, 50 to 60 Hz, 60-watts maximum. UL

listed power adapter

Environment

0°C (32°F) to 45 °C (113°F), free air circulation

0 to 90% relative humidity, non-condensing

Ethernet

10/100 Ethernet

Storage

4GB Compact Flash

Ethernet Port

The Ethernet port must be connected to the controller or to the same network as the controller.

This connection will be used to send and receive control data as well as for transferring script data

and interface files that have been stored on the controller.

Ethernet Cables

There are two types of Ethernet cables: patch cables and crossover cables.

Patch cables are wired straight thru end-to-end. This type of cable can be used to connect

ShowTouch to devices such as hubs, switches and routers.

Crossover cables are used for point-to-point connections between units. This is the type of cable

needed to connect ShowTouch directly to a PC.

ShowTouch can be connected to any V series Ethernet controller using either type of cable

because the controller is able to detect which type of cable is in use.

Below are T-568B wiring diagrams for the cable types, including standard wire color codes and

connector orientation.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46

Sin comentarios

Alcorn Mcbride ShowTouch Guía de usuario Pagina 41